WallPlus Cement Putty
WALL PLUS CEMENT PUTTY is white cement-based product having high strength and durability. It is suitable for interior as well as exterior application. It fills the fine pores of surface and gives white smooth finish which reduces the consumption of primer & paint and enhance the life of paint
Key Features
Excellent white finish
-
Smoothens surface
-
Reduces consumption of primer and paints
-
Coverage 2.2-2.5 Sq. M./Kg/Coat
SURFACE PREPARATION
Scrap the previously painted surface to remove loose or flaking material and paint, dust, grease, dirt or powdery material by thorough brushing. Any previous growth of algae, fungus or moss, chalking etc. needs to be removed using wire brush and cleaning with water. Treat the infected surface with a mild solution of household bleaching powder (recommended proportion 2kg to 50 Its water), leave it for 24 hours and then wash the surface with clean water. Surface should be clean, dry and free from efflorescence. Bigger cracks should be filled using cement & sand mixture in the ratio of 2:3.
PUTTY PREPARATION
Slowly mix the TATA Wallplus putty with 30 to 35% clean water for 10 to 15 minutes with hand or mechanical stirrer to get a uniform paste.
PUTTY APPLICATION
On the wet wall surface apply one coat of putty paste with the help of Putty blade from downward to upward by spreading it uniformly. This ensures less wastage and gives smooth finish. Apply second coat after 3-4 hours of drying. Make the surface smooth with sandpaper after complete drying. Ensure the total thickness of coat should not be more than 1.50 mm. Always prepare the putty as per the requirement so that it can be used within 2-3 hours after mixing with the water.