Ecoplus Interior Emulsion is a high quality water based paint suitable to use for interior application and protection of surface walls, ceilings, particle boards etc. It is available in wide range of attractive shades.
Before application ensure that surface is smooth and free from dust particles, grease and loose flakes. Rectify and smoothen minor cracks and uneven surface of the wall by using TATA Wallplus Putty followed by a coat of Wallplus Water Thinnable Cement primer. For Lime and Distemper surface remove all loose and dust particles, powdery material by using emery paper and prime it with a coat of Wallplus Water Thinnable Cement Primer to smoothen the surface. Corrective measure should be taken to arrest moisture source before painting.
Stir the contents thoroughly by shaking the container and after opening the lid as well. Mix 4 parts of ECOPLUS ACRYLIC INTERIOR EMULSION with 3 parts of clean water by volume. Prepare the paint as per the requirement, so that the thinned paint can be used on the same day after preparation.
Stir the mixed paint properly before use. Use a good quality paint brush, roller or spray gun for painting. Avoid under thinning or over thinning of paint. Apply minimum two coats of ECOPLUS Acrylic Interior emulsion thinned as per above mentioned ratio. The time gap of 3 to 4 hrs should be provided between each coat. After taking out the required quantity the lid of the container must be closed tightly.
Coverage depends very much on the method of application and nature of substrate. Diluted paint covers approx 18-20 sq mt/ It/coat
Available in 20ltr, 10ltr, 4ltr & 1ltr
Ecoplus Exterior Emulsion is water based paint which gives a long lasting exterior coating with combination of freshness and superior durability with the more economy than of cement paint. Its wide range of shades stay bright and acrylic formulation is specially made to combat the rigours of tropical climates
Old Surface / Previously painted surface should be cleaned thoroughly by vigorous wire-brushing and scraping to remove loose and flaking materials, dust, grease and dirt. Ensure that the surface is free from fungus, algae and moisture. Rectify and smoothen minor cracks and uneven surface of the wall by using TATA WALL PLUS Putty followed by a coat of Wallplus Water Thinnable Cement primer. In case of organic growths like fungus should be thoroughly removed with mild solution of household bleaching powder (recommended proportion 2kg to 50 It water), leaving it for 24 hours and then washing the surface with clean water. New Plastered surfaces should be allowed to cure for at least 3 months prior to painting. Fill the bigger cracks using cement and mixture in the ratio of 2:3. Extra care should be taken for surface like sunshades, parapets and other horizontal surface where water accumulates during rains.
Stir the contents thoroughly by shaking the container and after opening the lid as well. Mix four parts of ECOPLUS EXTERIOR EMULSION with three part of clean water by volume. Prepare the paint as per the requirement, so that the thinned paint can be used on the same day after preparation.
Stir the mixer properly before use. Use a good quality paint brush, roller or spray gun for painting. Avoid under thinning or over thinning of paint. Apply one self priming coat by diluting 1 part Emulsion Paint with 1 part water. Apply next coat by mixing three part of clean water to four part of paint by volume followed with two to three coats.
For Horizontal Surfaces like top of windows, hedges, sunshades and parapets etc where water accumulates during rain should be painted with three and more coats for greater protection.
Application can be done with brush, roller or spray gun with a suitable adjustment in consistency. The recoating time between two coats should be minimum four to six hours.
Coverage depends very much on the method of application and nature of substrate. Diluted paint covers approx11-12sq. m./It/coat.
Available in 20ltr, 10ltr, 4ltr & 1ltr
