Ecoplus Acrylic Distemper is water based interior finish and is best suitable for decorating fully matured plastered surfaces, concrete, brick work & asbestos surfaces. Ecoplus Acrylic Distemper is recommended for interior use only.
This is most economy acrylic distemper introduced in pouches. It has good brushability, flow and available in attractive shades. It's special formulation provides high adhesion property that prevents the paint from flaking or dusting for the long period of application.
Sand the surface with Emery paper 180 and wipe clean. Any previous growth of algae, fungus, moss or chalking etc needs to be removed by using wire brush. Crack & bent surfaces must be filled by TATA Wallplus Putty. Ensure painting is done on dry surface, free from dirt, grease, oil etc.
Apply one coat of Ecoplus Water primer & allow drying for six to eight hours. Mix two part of water & three part Ecoplus Acrylic Distemper for application consistency. Keep an interval of three to four hours between two coats. Prepare the Distemper as per the requirement, so that the thinned Distemper can be used on the same day after preparation.
Coverage depends very much on the method of application and nature of substrate. Diluted paint covers Approx 6-8 sq. mt/ kg/coat.
Pack Size For Ecoplus Acrylic Distemper : Available in 20 kgs, 10 kgs, 5 kgs, 1 kg
Pack Size For Umang Acrylic Pouch Distemper: Available in 1 kg pouch in 12 attractive shades.